The stranding machine is also known as high speed stranding machine, wire drawing machine, twisting machine.

The use of stranding machines is widely used in all kinds of soft/hard conductors (copper wire, enameled wire, tinned wire, copper clad steel, copper clad aluminum, etc.) And the twisting of the electronic wires, such as: power lines, telephone lines, audio lines, video lines, car line network lines, and the like. Twist a single single conductor into a strand to achieve the wire process.

The following is a technical feature of the high-speed stranding machine:

1 The speed of the strander spindle can be as high as 3000 rpm.

2, automatic tension control: When the twisted wire is received, the wire tension needs to be continuously increased when the wire is received from the bottom of the disk, and the machine can automatically track Adjust the tension of the take-up thread; make the tension of the whole thread take-up uniform, and the machine can adjust the tension without stopping the machine.

3. There are three pressing devices in the machine to ensure the roundness of the conductor after stranding and reduce the loss of insulation material.

4, the main engine is oil lubrication, natural circulation cooling, effectively extending the service life of the spindle bearing. The wire-passing system adopts a new structure, and the wire is directly passed from the spindle guide wheel to the bow band, and the scratching and jumping phenomenon caused by the failure of the corner guide wheel on the aluminum disk is subtracted.

5, the whole machine adopts synchronous belt transmission, there is no lubrication point inside the machine, keeping the machine clean, the stranded wire is free of oil, and it is suitable for various surface cleanliness requirements. The conductors of the higher wire types are stranded.

6. Adjusting the spanning distance only needs to replace one take-up wheel. Adjusting the twisting direction only needs to pull the reversing lever to operate simply, thus reducing the operator's Error rate and work intensity. The whole machine bearings are all well-known brands in Japan. The bow belts are made of new materials. They are flexible and avoid jumping stocks caused by vibration during high-speed operation. Inverters, PLCs, magnetic powder clutches, electromagnetic brakes, hydraulic jacks, etc. all adopt imported famous brands. Reduce the failure rate and maintenance costs.